The Manfrotto Variable Friction Magic Arm with Quick Release is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. Its camera platform...
The Manfrotto 244MINI Friction Arm is a versatile 9.45in support arm with 1/4in-20 male thread attachments on both ends and an included 3/8in-16 adapter. Its attachments are tightly secured with the...
Have everything you need to mount an off-camera flash or accessory to a tripod, stand, or bar with the Manfrotto 244 Micro Friction Arm Kit. Both ends of the friction...
The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening...
This Manfrotto 237HD Heavy Duty Flex Arm is 18mm in diameter, wider than the standard Flex Arm. Otherwise, it shares the identical feature set: 21.1 inch (55 cm) in length...
This is a Manfrotto 237 Flexible Arm 1/2 inch diameter, 20.5 inch gooseneck with 5/8 inch stud for exact positioning of small gobos, reflectors, props, or flash heads. Hex end...
The Manfrotto 200PL-Pro Aluminum Plate is RC2 and Arca-type compatible. It can be used with cameras with a 1/4 inch-20 tripod thread and comes with a 3/8 inch-16 screw adapter for...
The Manfrotto 200PL Quick Release Plate with 1/4 inch-20 Screw and 3/8 inch Bushing Adapter is the replacement quick release plate for all heads that use the RC2 (3157N) system....
The Manfrotto 186 Female Threaded 3/8inches to Male 5/8inches Stud Adapter is a 50mm long stud adapter that has a threaded 3/8 inch female socket at the bottom, and a...
The Manfrotto 158 Adapter converts a 5/8 inch (16mm) light stands top to a 5/8 inch female socket. Use it to connect two units with 16 mm spigots, or to...
This is a set of five reducing bushings from Manfrotto, used to mount any accessory with a female 3/8 inch-16 threaded socket onto a 1/4 inch-20 male screw.
The Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The lever tightens and locks for precise...
The Manfrotto 131DD Tripod Accessory Arm for Four Heads mounts onto the center column of tripods with 3/8 inch threads. The platforms feature 3/8 inch screws, which allows a standard...
With background paper or cloth for a photo, you need a secure way to hold it--the Manfrotto Background Support System will handle it. Two light stands that extend up to...
The Manfrotto 127 Basic Video Dolly features a 22 lb load capacity and supports all tripods with a 20 inch radius (as long as the overall weight of the tripod,...
The Manfrotto 119 Short Adapter Spigot is a 16mm long universal adapter spigot that features a 1/4 inch-20 female thread at one end and a 3/8 inch female thread at...
This is a Manfrotto 118 Universal Short Spigot with Double Male Thread. It fits the (2905) Swivel Umbrella Adapter. 5/8 inch diameter with 1/4-20 and 3/8 inch threaded tip.This part...
The Manfrotto 088 Female 1/4inch-20 to Male 3/8 inches Thread Adapter is for use with light stands or tripods that have a top screw of 1/4inch-20, when the lighting fixture...
The Manfrotto 045 Background Triple Hooks For Three Backgrounds is a set of two background paper holders that holds three Bogen Expan 046 drive units. The Triple Hook can be...
This is a Manfrotto 044 Background Holder hook that will support up to 3 background crossbars or Expan Drives, when mounted onto the Manfrotto AutoPoles. It consists of two 2921...
The Manfrotto 038 Double Super Clamp is a unit of two Super Clamps made of lightweight cast alloy, fastened together at a 90° angle. Clamps on tubes: 1/2 to 2-1/8...
The Manfrotto 037 Reversible Short Stud is a short stud made from brass that fits into the Super Clamp. It features a 3/8 inch screw at one end and a...
The Mafrotto 036-38 Standard Stud with 3/8in Screw snaps into a Super Clamp socket. It has a 3/8in screw thread at its other end. Use it directly with equipment that features a...
The Manfrotto 036-14 Standard Stud features a standard 1/4in-20 screw on one end, and snaps into a Super Clamp socket on the other end. Use it to mount cameras, directly...
The Manfrotto 2915 Super Clamp is made of lightweight cast alloy. The Super Clamp is a very versatile tool and it holds just about anything: cameras, lights, umbrellas, hooks, shelves,...
The Manfrotto 024B Boom Assembly is comprised of three sections, extends to ~6.5' (2.1 m) and can easily be disassembled to 28 inch (71cm) for storage or transport. The black...
The Manfrotto 015 Female 3/8in to Male 1/4in-20 Adapter reduces a 3/8in threaded screw to a standard 1/4in-20 tip. This item replaces old catalog #3358.
The Manfrotto 014-38 Rapid Adapter is a locking adapter that fits any light stand with a 5/8inches top stud and will allow vertical or horizontal mounting of a light fixture,...
The Manfrotto 155BKL Double Ball Joint without Camera Platform increases the possibility of angle to what you have attached it to. It is super clamped compatible and very sturdy. The...
The Manfrotto 612 Nitrotech is a flat base fluid video head designed for the versatility needs of the independent content creator who's engaged in different types of projects. Thanks to...
