The 7 inch (18cm) Grid Reflector from Elinchrom is a general purpose 70-degree reflector that can be used for direct or indirect lighting with Elinchrom umbrellas. When used with the...
The Elinchrom Two Piece Umbrella Set consists of two umbrellas - one silver, for soft bouncelight with a little sparkle, and one translucent soft -- for softening light. Both umbrellas...
The Elinchrom 26061 Snoot with 10° Grid attaches to the front of any Elinchrom flash head. It consists of the #26425 Snoot, which narrows the spread of light from the...
The 18cm Basic Grid Reflector Set with 30 Degree Grid from Elinchrom is comprised of a general purpose reflector with a built-in lip that accepts the included 30-degree spring-loaded grid....
Elinchrom Honeycomb Grid For 8.25-Inches Reflector - 8 DegreesGrids are essential accessories for any lighting system. A grid alters the shape and intensity of the light output from your light...
Elinchrom Honeycomb Grid For 8.25-Inches Reflector - 12 DegreesGrids are essential accessories for any lighting system. A grid alters the shape and intensity of the light output from your light...
The 21cm Elinchrom 20 Degree Honeycomb Grid fits 21cm (8.25 inch) Elinchrom Reflectors. Grids give precision control to your lights. Offering very directional positioning, which often helps in difficult lighting situations.
The 21cm Elinchrom 30 Degree Honeycomb Grid fits 21cm (8.25 inch) Elinchrom Reflectors. Grids give precision control to your lights. Offering very directional positioning, which often helps in difficult lighting...
Comprising a pair of grids and the standard 8.25inch / 21cm reflector, the Elinchrom Basic Reflector and Grid Set includes a trio of tools to enable greater control over your...
This Barn Door Set includes Includes a 21cm accessory holder, 2x 26x16cm barndoor leaves and 2x 21x15cm barndoor leaves. It requres the use of a 21cm reflector
Made for the standard 8inch reflector and able to rotate 360-degrees, the Elinchrom Barndoor Set 21 is a modifier that allows you to selectively light your subject by moving any...
The Elinchrom Light Shaper Carrier 21cm fits onto the front of a reflector. It is compatible with a broad array of attachable accessories like grids, filters, diffusers, and barn doors....
This Elinchrom Grid For 70cm Softlite Reflectors is a light modifier that clamps on to the front of the 27.5inch 64 degree or 82 degree Softlite Reflectors. The grid controls...
Deflect light toward your subject effortlessly with the Elinchrom 26 x 16 cm Rectangular Blade Barndoor. It is hinged, resistant to heat, and comes with a non-reflective black finish. This...
Deflect light toward your subject effortlessly with the Elinchrom 26 x 16 cm Rectangular Blade Barndoor. It is hinged, resistant to heat, and comes with a non reflective black finish....
The Elinchrom Modeling Lamp 100W (196V) is an E27 base bulb with an average life of 500 hours and a colour temperature of approximately 3200K. It iscompatible with heads such as...
The Elinchrom Bayonet Reflector Support Set is a set of 4 bayonet adapter rings that will accept any Elinchrom reflector made since 1974. You can safely store reflectors and/or softboxes...
The Elinchrom 2.5A Fuse D-Lite RX One (10-Pack) has a rating of 2.5 Amperes and can be used with the 1/22/23/D-Lite Lamp. Suitable as a genuine spare or replacement part
The CamRanger 2 Wireless Transmitter builds upon the original CamRanger that has previously set the standard for pro-photography transmitters. It delivers wireless tethering and camera control 5 times faster than...
Suitable for portraits, head shots, interviews, and fashion, the 34.8" Light Dome II from Aputure is a 16-sided modifier that offers quality of light options and wide compatibility with Aputure...
Ideal for use overhead or to raise the ambient illumination level, the 26in diameter Lantern Softbox from Aputure has the same omni-directional quality of light as the "China Balls" of yore...
Trigger flashes wirelessly with this YN-622N i-TTL Wireless Flash Transceivers from Yongnuo. Compatible with Nikon i-TTL cameras, one transceiver slides directly into the hot shoe and utilises a 2.4 GHz...
Control multiple flashes equipped with the YN-622C E-TTL II transceiver with the YN-622C-TX E-TTL II Wireless Flash Controller from Yongnuo. Compatible with Canon E-TTL II cameras, this controller slides directly...
The LED Macro Ring Flash is the perfect choice for photographers who require shadow free illumination. It is designed for close up, macro, medical, scientific and forensic photography as the flash light...
The silver Voigtlander VC Meter II is a small, lightweight accessory meter that serves well for people who use older Leicas and similar rangefinder cameras. The meter conveniently slips into...
Inspired by the popular legacy of the L-308 series that began almost a quarter of a century ago, the NEW Sekonic FLASHMATE L-308X addresses significant features and functions that meet...
With its adjustable flash arm, the right-handed black ProMediaGear BBX Boomerang Flash Bracket fits most DSLR and mirrorless cameras. It features a unique 90° rotating design to allow the flash...
The straight, PocketWizard MM3 Mini to Mini Flash Sync Cable allows remote triggering of flash units with a 1/8 inch sync outlet using a PocketWizard transmitter or transceiver.
The PocketWizard AC7 RF Shield for FlexTT5 solves the problem of limited performance of the FlexTT5 radio transceiver when operated using the Canon 580EX, 580EX II and 430EX flashes, caused...
The Varos Pro S Multi-Function Flash Shoe Umbrella Holder from Phottix is 300% stronger than previous versions and features an aluminum alloy body with a metal cold shoe as well...
