Silence Corner Atoll D + for DSLR Cameras – Black

✱This product includes✱
Ring Base X1 : Max Lens Diameter 75mm
Camera Plate X1 : Extended Plate
Detachable Extended Brackets X2
4mm hex wrench X1
3mm hex wrench X1
 Link Screw X4
 1/4"-20UNC Screw X2

✱Features✱
Change the camera angle in one second.
180° free rotation, smooth experience. In some condition, it can even rotate to 360
3 click points at 0°, 90° and 180°. It's much intuitive to adjust camera angle.
Change lens directly without disassemble. (compares to a tripod collar) Extremely safe to change lenses in dark place.
Keep center of gravity, more balanced.

✱Compatibility✱
Please check📍ATOLL compatible list for your camera, To avoid buying the wrong model.

Nikon Z series cameras are compatible with Heightening Plate and ATOLL D/D+ 
Heightening Plate and ATOLL D/D+ is not compatible with Nikon Z9/battery grip/body cage/L bracket

If you need to install the Grip/body cage/L bracket, please choose ATOLL X
Because the flash of Nikon DSLR is very protruding, many lenses cannot be mounted, It is recommended to install ATOLL X instead of ATOLL D on Nikon DSLR.
Canon DSLR series cameras cannot be mounted with EF 11-24 f/4 & 16-35 f/2.8 III & 24-70 f/2.8II or larger lenses after installing ATOLL D/D+
Canon DSLR recommends installing ATOLL X to install EF 11-24 f/4 & 16-35 f/2.8 III & 24-70 f/2.8II or larger lenses.

✱Installation guide✱
Please watch 📍ATOLL installation guide for more installation details.

Since Nikon Z series cameras are not high enough, if you install ATOLL D/D+ on Z series, it may not be completely aligned with the center of the lens, (However, most Z series lenses can be installed)

There are two ways to align ATOLL  to the lens center of Nikon Z series cameras
Add-ons a Heightening Plate
you can try to disassemble the ATOLL, as shown in this video (there is grease inside, please pay attention) https://youtu.be/mktHdhu2xss 

When installing the ATOLL D/D+ on the Nikon Z8, it may not fully align with the center of the lens, but most Z-mount lenses can be used. You can add a Bridge Plate to align it perfectly.

When installing the ATOLL D+ on the Nikon Z8 with an Extended Brackets, the Nikon 28-400 lens cannot be mounted

ATOLL D+ is not compatible with version Z Tamron 35-150 F/2-2.8
-If you install the Z mount version of the Tamron 35-150mm f/2-2.8 when using the ATOLL D+, it will block the camera grip space and prevent the use of the new Extended Brackets.

-If you install the Z mount version of Tamron 35-150mm f/2-2.8, it is recommended to choose ATOLL X+

Installing Heightening Plate & ATOLL C/C+ on the Z series may cover the function keys.
If you usually use the function keys,we recommend Heightening Plate & ATOLL D/D+,which can make ATOLL farther away from the camera and increase finger space to access function key.