Teradek Bolt 1000 XT SDI/HDMI Set

The Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. The receiver also comes with a male Gold mount battery plate on one side and a female Gold mount battery plate on the other, which can pass through power when mounted. This set enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features 1000 feet line-of-sight transmission distance when used together. You can send and receive visually lossless 3G video signals from a Bolt 1000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor.

The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, 480p, and 576p are only supported via HDMI. You can transmit up to three other third-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4 inch -20 threaded hole, two M3 threaded holes, and a built-in 3/8 inch -16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000 feet line-of-sight.

A shoe mount is included for attaching to cameras without 1/4 inch -20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

• Compatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt
• HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
• 5 GHz Spectrum Analyser
• Manual channel selection
• Supports 11 channels in the 40 MHz band
• SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
• 1/4 inch -20 and M3 mounting points

Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Receiver (Dual Gold Mount Plate)
With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G video or HDMI signals from a Bolt 1000 transmitter with zero latency. The receiver also comes with a male Gold mount battery plate on one side and a female Gold mount battery plate on the other, which can pass power through when mounted. The Bolt XT is compatible with the Sidekick II and the 703 Bolt, as well as the Bolt LT. The receiver unit itself can be secured via built-in 1/4 inch -20 or M3 threaded holes.

A light stand adaptor is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES-128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals. The receiver features a built-in 3D LUT engine and a 5 GHz spectrum analyser so you can find a clean signal path.

• Backward compatible with Bolt 1000 LT, Sidekick II, and 703 Bolt.
• The receiver includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyser to help you find a clean signal pathway.
• Includes dual female and male pass-through Gold mount battery plates.
• SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
• OLED screen with Menu Joystick Navigation.
• 1/4 inch -20 and M3 mounting points.
• Five included antennas for the receiver enable it to pick up signals with clarity.